Gen2 Needle Free Connector 16C008
Gen2 Needle Free Connector 16C008
Straight type connector for OD 4mm tubing
Color : Transparent
Material : PC + MABS
Application : for infusion type
Color : Transparent
Material : PC + MABS
Application : for infusion type
Model :
16C008
- 16C008
- Straight type connector for OD 4mm tubing
- Color : Transparent
- Material : PC + MABS
- Application : for infusion type
- 325 PSI
- Materials - Medical grade polycarbonate and medical grade silicone, biocompatibility test pass.
- Pressure type - Neutral pressure.
- Functional activation - Up to 200 actuations.
- Flow rate - 120 ~ 145 ml / min (at 35.4 inch head height).
- Residual volume - 0.016ml
- Reflux Volume - 0.01ml
- Flush Volume - Minimal dead space (also referred to as residual volume) of 0.016 mL allows for lower flush volumes.
- Disconnect force - <1kg
- Pressure leakage - Up to 1.5kg/cm2 of air (Disconnection)
- Back Pressure40~70psi
- Pressure Maximum：140~300psi
- Alcohol - Compatible : Yes.
- Lipid - Compatible : Yes.
Features of Gen2 Needleless Infusion Series:
- Neutral Pressure Design:
- Utilizes a neutral pressure design, minimizing discomfort during needle insertion and withdrawal, enhancing patient experience.
- Metal-Free Construction:
- Excludes metal components to prevent malfunctions and ensure compatibility with MRI procedures.
- ISO 594 Standards Compliance:
- Fittings adhere to ISO 594 standards, ensuring compatibility with a wide range of infusion products that follow the same standards.
- Medical-Grade Materials:
- Housing and septum crafted from medical-grade polycarbonate and silicone, facilitating visual monitoring of fluid paths during operations.
- Bio-compatibility and Resistance:
- Bio-compatibility tests passed, demonstrating resistance to lipids and alcohol.
- Silicone Seal Activation:
- Silicone seal can be activated up to 200 times, providing reliable microbial barrier protection.
- Fluorescein Dye Test:
- Results from fluorescein dye tests indicate no residual dye on the swabable surface after disconnecting and swabbing.
- High-Pressure Infusion Capability:
- Model #16C002 available for high-pressure infusion therapy, capable of withstanding pressures up to 22.8kg/cm² (325PSI) from the pipeline.
- Comply with ISO 594 standards
- Easy to clean swabable surface
- Neutral pressure, reduce the pain of insert and pull out the needle
- Low residual, only 0.016ml priming volume when disconnected
- Biocompatibility test pass
- Easy to visualize the fluid path
- Small size, acquired patents from multiple countries
