Gen1 T Connector for 2.3 mm Tubing 18C049
Gen1 T Connector for 2.3 mm Tubing 18C049
Model :
18C049
The 18C049 is a negative pressure needle free connector in the Chi Feng Gen1 family, configured as a T connector for OD 2.3mm tubing. It gives the set an inline T-shaped access point on a narrow 2.3mm line, and the connection is made without a needle at the access point. The housing and split septum are medical grade plastics with no metal parts, and the luer geometry follows ISO 80369-7 so the connector mates with any device built to that standard. Chi Feng supplies this part as a component or sub-assembly to medical device manufacturers; market clearance for the finished device is held by the finished device manufacturer. Custom color, custom material and customer branded packaging are available.
- Model: 18C049
- Type: T connector
- Tubing compatibility: OD 2.3mm tubing
- Connector family: Gen1 needle free connector
- Pressure type: Negative
- Functional activations: up to 200 cycles
- Flow rate: 150 mL/min
- Back pressure: 70 psi
- Maximum pressure: 325 psi
- Residual volume: 0.3 mL (inside connector only)
- Connection standard: ISO 80369-7, male and female luer slip and luer lock; also complies with ISO 594
- Housing material: medical grade polycarbonate (PC)
- Septum material: medical grade silicone
- Metal content: metal free
- Color: Blue
- Material combination: PC + MABS
- Biocompatibility: tested to ISO 10993-1
- Fluid compatibility: 75% alcohol yes, 20% lipid emulsion yes
- Sterilization: supplied non-sterile, or EtO or Gamma to customer specification
- Quality system: ISO 13485:2016 certified by BSI
- Production environment: ISO class 8 cleanroom
- Patents: granted in the USA, EU, Taiwan, China and Japan
- Regulatory role: component supplier; market clearance held by the finished device manufacturer
- Customization: OEM, ODM, private label, custom color, custom material, custom bore
- MOQ: 6,000 pieces
- Simple three component construction, which reduces the chance of failure compared with multi part valve designs
- Negative pressure design; sets built around it normally specify a clamping step before disconnection
- Metal free construction, which simplifies material declarations
- Swabable flat top surface; fluorescein dye testing showed no dye residue after disconnection and wiping
- ISO 80369-7 luer geometry, so it mates with any device built to that standard
- Medical grade polycarbonate housing with a medical grade silicone split septum
- Tested to ISO 10993-1 for biocompatibility
- Compatible with 75%% alcohol and 20%% lipid emulsion
- Residual volume 0.3 mL inside the connector
- Supplied non-sterile, or EtO or Gamma sterilized to your specification
- Manufactured in an ISO class 8 cleanroom under a BSI certified ISO 13485:2016 quality system
- Available for OEM and ODM programs with custom color, material, bore and private label packaging
- IV administration sets requiring a needle free access point on OD 2.3mm tubing
- Extension lines and inline access assemblies
- Multi port set designs where an access point is needed partway along the line
- Custom set assemblies built by medical device OEM and ODM customers
- Veterinary infusion set programs using the same ISO 80369-7 geometry
- Contract manufacturing programs sourcing a qualified luer access port
